Articles
M. Hassan, G. Hussain, A. Ali, M. Ilyas, W. Khan S. Malik, B.Bal*, "Effect of Pre-rolling temperature on the Interfacial properties and Formability of Steel-Steel bilayer sheet in Single Point Incremental Forming", Under review.
B.Bal*, B. Cetin, F.C. Bayram, E. Billur, “Effect of hydrogen on fracture locus of Fe-16Mn-0.6C-2.15Al TWIP Steel”, Under review.
B.Bal*, B. Okdem, F.C. Bayram, M. Aydin, “A Detailed Investigation of the Effect of Hydrogen on the Mechanical Response and Microstructure of Al 7075 Alloy under Medium Strain Rate Impact Loading”, Under review.
A. Isoglu, F. C. Bayram, A. Yoruk, B.Bal*, “Experimental Investigations of the Combination of Size and Strain Rate Effects on the Mechanical Response of PCL Electrospun Membranes”, Under review.
Aslan, A., Salur, E., Güneş, A., Şahin, Ö.S., Karadağ, H.B., Akdemir, A., Effect of Ultrasonic Cleaning upon Mechanical and Microstructural Properties of Metal Matrix Composites, Under Review
Atahan M.G.*, Apalak M.K., "Low velocity oblique impact behavior of adhesively bonded single lap joints", JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, vol.34, no.3, pp.263-298, 2020.
B. Uzer*. Modulating the surface properties of metallic implants and the response of breast cancer cells by surface relief induced via bulk plastic deformation, Frontiers in Materials. 7 (2020) 1-10.
H. Najam, M. Koyama, B.Bal*, E. Akiyama, K. Tsuzaki, "Strain rate and hydrogen effects on crack growth from a notch in a Fe-high-Mn steel containing 1.1 wt% solute carbon" International Journal of Hydrogen Energy, 45 (2020), 1125-1139.
Güneş, A., Şahin, Ö.S., Investigation of The Effect of Surface Crack on Low Velocity Impact Response in Hybrid Laminated Composite Plates, Journal of The Brazilian Society of Mechanical Sciences and Engineering, 1,1-14,2020
Şahin, Ö.S., Güneş, A., Aslan, A., Salur, E., Karadağ, H.B., Akdemir, A., Low Velocity Impact Behavior of Porous Metal Matrix Composites Produced by Recycling of Bronze and Iron Chips, Ir. Journal of Science and Tech., Transactions of Mechanical Engineering, 43, 53-60, 2019
Salur, E., Aslan, A., Kuntoğlu, M., Güneş, A., Şahin, Ö.S., Experimental Study and Analysis of Machinability Characteristics of Metal Matrix Composites During Drilling, Composites Part B: Engineering 166, 401-413, 2019
Aslan, A., Salur, E., Güneş, A., Şahin, Ö.S., Karadağ, H.B., Akdemir, A., The mechanical properties of composite materials recycled from waste metallic chips under different pressures”, International Journal of Environmental Science and Technology, 16 (9), 5259-5266, 2019
S. Cicek, A. Karaca, I. Torun, M. S. Onses, B. Uzer*. The relationship of surface roughness and wettability of 316L stainless steel implants with plastic deformation mechanisms, Materials Today: Proceedings 7 (2019) 389-393.
O. Dogan, V. Esat, B.Bal*, “Experimental investigation on chloroprene and acrylonitrile butadiene rubber types reinforced with nano-materials” Materials Research Express , 6 (2019), 1-29.
B.Bal*, I.B. Tugluca, N. Koc, A. Isoglu, “On the Detailed Mechanical Response Investigation of an Electrospun PHBV/ PCL and PHBV/ PLGA Membranes” Materials Research Express, 6 (2019), 065411.
B.Bal*, K.K.Karaveli, B. Cetin, B.Gumus, “The Precise Determination of the Johnson-Cook Material and Damage Model Parameters and Mechanical Properties of Aluminum 7068-T651 Alloy”, 141 (2019), Journal of Engineering Materials and Technology, 041001-041011.
N. Tüten, D. Canadinc, A. Motallebzadeh, B.Bal*, “Microstructure and tribological properties of TiTaHfNbZr high entropy alloy coatings deposited on Ti-6Al-4V substrates”, Intermetallics, 105 (2019), 99-106.
I.B. Tugluca, M. Koyama, Y. Shimomura, B.Bal*, D. Canadinc, E. Akiyama, K. Tsuzaki, “Lowering strain rate simultaneously enhances carbon- and hydrogen-induced mechanical degradation in an Fe-33Mn-1.1C steel: multi-scale localized plasticity”, Metallurgical and Materials Transctions A, 1 (2019), 1-5.
B. Uzer*, S. Picak, J. Liu, T. Jozaghi, D. Canadinc, I. Karaman, Y.I. Chumlyakov, I. Kireeva. On the mechanical response and microstructure evolution of NiCoCr single crystalline medium entropy alloys, Materials Research Letters 6 (2018) 442-449.
D. Canadinc, B. Uzer*, M. Elmadagli, F. Guner. Nanotwin formation in high-manganese austenitic steels under explosive shock loading, Metallurgical and Materials Transactions A 49 (2018) 1026-1030.
B. Uzer*, F. Monte, K.R.I. Awad, P. Aswath, V.G. Varanasi, D. Canadinc. The influence of plastic deformation mechanisms on the adhesion behavior and collagen formation in osteoblast cells, TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer. (2018) 295-301.
B.Bal*, “A study of different microstructural effects on the strain hardening behavior of Hadfield steel” International Journal of Steel and Structures, 18 (2018), 13-23.
I.B.Tuğluca, M.Koyama, B.Bal*, D. Canadinc, E. Akiyama, K. Tsuzaki, “High-concentration carbon assists plasticity-driven hydrogen embrittlement in a Fe-high Mn steel with a relatively high stacking fault energy”, Materials Science & Engineering A, 717 (2018), 78-84.
B.Bal*, M. Koyama, D. Canadinc, G. Gerstein, H. J. Maier, K. Tsuzaki, “Uncovering the individual roles of different hardening mechanisms on the deformation response of Fe-23Mn-0.5C TWIP steel” Journal of Engineering Materials and Technology, 140 (2018), 031002.
Aslan, A., Güneş, A., Salur, E., Şahin, Ö.S., Karadağ, H.B., Akdemir, A., Mechanical Properties and Microstructure of Composites Produced by Recycling Metal Chips, International Journal of Minerals, Metallurgy, and Materials 25 (9), 1070-1079, 2018
Aslan, A., Salur, E., Güneş, A., Şahin, Ö.S., Karadağ, H.B., Akdemir, A., Production And Mechanical Charecterization of Prismatic Shape Machine Element By Recycling of Bronze And Cast Iron Chips, Journal of the Faculty of Engineering and Architecture of Gazi University, 33 (3), 1013-1027, 2018
Atahan M.G.*, Apalak M.K., "Low-speed bending impact behavior of adhesively bonded single lap joints", JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, vol.31, no.14, pp.1545-1575, 2017
B.Bal*, “Numerical Investigation of the Role of Volumetric Transformation Strain on the Relaxation Stress and the Corresponding Hydrogen Interstitial Concentration in Niobium Matrix” Advances in Materials Science and Engineering, 2017 (2017), Article ID: 2036516.
B.Bal*, “A study of different microstructural effects on the strain hardening behavior of Hadfield steel” International Journal of Steel and Structures, 2017, Accepted.
B. Uzer*, D. Canadinc, The effect of plastic deformation on the cell viability and adhesion behavior in metallic implant materials, Processing, Properties, and Design of Advanced Ceramics and Composites II. 261 (2017) 187-196.
B. Uzer*, O. Birer, D. Canadinc, Investigation of the dissolution-reformation cycle of the passive oxide layer on NiTi orthodontic archwires, Journal of Shape Memory and Superelasticity. 3 (2017) 264-273.
Bal B., Koyama M., Gerstein G., Maier H.J., Tsuzaki K. , "Effect of strain rate on hydrogen embrittlement susceptibility of twinning-induced plasticity steel pre-charged with high-pressure hydrogen gas", INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, vol.41, pp.15362-15372, 2016
Gumus B., Bal B., Gerstein G., Canadinc D., Maier H.J., "Twinning activity in high-manganese austenitic steels under high velocity loading", MATERIALS SCIENCE AND TECHNOLOGY, vol.32, pp.463-465, 2016
Bal B., Sahin İ., Uzun A., Canadinc D., "A New Venue Toward Predicting the Role of Hydrogen Embrittlement on Metallic Materials", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.1, pp.1-14, 2016
Bal B., Gumus B., Canadinc D., "Incorporation of dynamic strain aging into a Visco-Plastic Self-Consistent model for predicting the negative strain rate sensitivity of Hadfield steel", JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, vol.138, pp.1-8, 2016
B. Uzer*, B. Gumus, S.M. Toker, D. Sahbazoglu, D. Saher, C. Yildirim, S. Polat Altintas, D. Canadinc, A Critical Approach to the Biocompatibility Testing of NiTi Orthodontic Archwires, International Journal of Metallurgy and Metal Physics, 1 (2016) 1-7.
B. Uzer*, S.M. Toker, A. Cingöz, T. Bagci-Onder, G. Gerstein, H.J. Maier, D. Canadinc, An Exploration of Plastic Deformation Dependence of Cell Viability and Adhesion in Metallic Implant Materials, Journal of the Mechanical Behavior of Biomedical Materials. 60 (2016) 177-186.
Onal O., Bal B., Canadinc D., Akdari E., "Experimental and Numerical Evaluation of Thickness Reduction in Steel Plate Heat Exchangers", JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, vol.137, 2015
Gumus B., Bal B., Gerstein G., Canadinc D., Maier H.J., Guner F., et al., "Twinning activities in high-Mn austenitic steels under high-velocity compressive loading", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.648, pp.104-112, 2015
Bal B., Gumus B., Gerstein G., Canadinc D., Maier H.J., "On the micro-deformation mechanisms active in high-manganese austenitic steels under impact loading", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.632, pp.29-34, 2015
Onal O., Bal B., Toker S.M., Mirzajanzadeh M., Canadinc D., Maier H.J., "Microstructure-based modeling of the impact response of a biomedical niobium-zirconium alloy", JOURNAL OF MATERIALS RESEARCH, vol.29, pp.1123-1134, 2014
Kececi, E.F., “Fireproofing the firefighting robot”, Photonics Spectra, vol. 43, no. 6, pp. 43- 46, 2009.
Kececi, E.F., “Design and prototype of mobile robots for rescue operations”, Robotica, vol. 27, no. 5, pp.729- 737, 2009.
Kececi, E.F., “Completely mechanical quick changeable joints for multipurpose explosive ordnance robot”, Robotica, vol. 27, no. 4, pp. 555-565, 2009.
Kececi, E.F., Tang, X., Tao, G., “Adaptive actuator failure compensation for redundant manipulators”, Robotica, vol. 27, no. 1, pp. 19-28, 2009.
Kececi, E.F., and Tao, G., “Adaptive vehicle skid control”, Mechatronics, vol.16, no.5, pp. 291- 301, 2006.
Books
Kececi, E.F., “Mechatronic Components: Roadmap to Design” ISBN 978-0-12-814126-7, Elsevier, to be published in 2018.
Bukey, M.V., Kececi, E.F., “Control Applications for Mobile Robots: Self Stabilizing Platform for Rescue Robots with Off the Shelf Electronics”, LAP Lambert Publishing, ISBN 978-3330326651, 2017.
Kececi, E.F., Ceccarelli , M., “Mobile Robots for Dynamic Environments”, ASME, ISBN 978-1606508213, 2015.
Ceccarelli , M., Kececi, E.F., “Design and Prototypes of Mobile Robots”, ASME, ISBN 978- 0791860472, 2015.
Kececi, E.F., “Embedded electronics design with pic microcontrollers for robotics and automation applications”, in Turkish, ISBN 978 9944-89-618-4, 2009.
Book Chapters
Malik, F.M., Ali, S.F., and Kececi, E.F., “Optimization of Additive Manufacturing for Layer Sticking and Dimensional Accuracy”, by Kumar K., “Additive Manufacturing Technologies from an Optimization Perspective”, IGI Global, accepted to be published in 2019.
Ali, S.F., Malik, F.M., and Kececi, E.F., “Geometrical Calibration in Additive Manufacturing: From an Ellipse to a Circle”, by Kumar K., “Additive Manufacturing Technologies from an Optimization Perspective”, IGI Global, accepted to be published in 2019.
Sadeghi,M.M., Kececi, E.F., Bilsel, K.,and Aralasmak, A., “Biomedical Image Processing Software Development for Shoulder Arthroplasty”, by Swarnambiga, A., “Medical Image Processing for Improved Clinical Diagnosis”, IGI Global, ISBN 9781522558774, 2018.
Kececi, E.F., Kendir, F., “Wired Autonomous Vacuum Cleaner”, by Zhang, D., Wei, B., “Mechatronics and Robotics Engineering for Advanced and Intelligent Manufacturing”, Springer International Publishing, ISBN 978-3319335810, 2017.
Kececi, E.F., “Design issues for mechanical structures” by Kececi, E.F., Ceccarelli , M., “Design and Prototypes of Mobile Robots”, ASME, 978- 0791860472, 2015.
Kececi, E.F., “Safer and faster humanitarian demining with robots” by Ceccarelli , M., “Service Robots and Robotics: Design and Application”, IGI Global, 978 1466-60-291-5, 2012.
Patents
Kececi, E.F., and Bilsel, I.K., “High Capacity Spiral Shaped Anchor for Medical Applications”, US 62/691,636, Patent Pending.